Best Equalizer Settings For Bass For Better Sound

It always baffles me whenever I think about the train ride that has been the relevance of bass in the music industry. Growing up, no one cared about the bassist. Bassists were considered “not so important,” which was the dumbest statement ever.

However, in the modern era, it seems that people have finally started to appreciate the beauty that bass adds to a song. It is to the point where some people only care about the bass.

I am sure you have seen that guy with the extremely loud car speakers. You only hear the bass and nothing else. That is extreme too. To truly enjoy music, you must find a balance.

If you are a bass head like myself, you prefer bass to be a bit more than the highs and mids. So, in this article, let me show you guys the best equalizer settings for bass. Now, there is no “one magic setting” that works for all devices.

Phones, laptops, and Car Stereos all vary from each other and what you are listening to makes a ton of difference as well. A setting that works for movies may not work so well for music. In this article, I will cover the best settings for your Phone, PC/Laptop, and Car. Let us start with the car:

Best equalizer settings for bass inside the car

Every car stereo system differs from one another here and there, but the basics, for the most part, remain the same.

bass setting for car - BEST EQUALIZER SETTINGS FOR BASS

1. Subwoofer Level (SW Level):

A subwoofer specializes in low frequencies… basically bass. The RCA output in your system can be used as a Subwoofer output to improve the bass. Switch the Subwoofer Level “On,” and now, you can adjust the output of your subwoofer. The “best” setting is subjective so adjust according to your preference.

Check The Recommended High Bass Subwoofer For Your Car

Rockville RW10CA 10" 800 Watt Slim Low...

Rockville RW10CA 800 Watt 10" Slim Car...
800 Watts Peak / 200 Watts RMS. PWM MOSFET Power...

Check Price On Amazon

2. Volume:

The thing is, if you blast your songs too loud, no matter the quality of the speaker and equalizer setting, the sound is going to be disappointing. Sorry, a guy that thinks he is really cool blasting music at 3 is outside my house. To truly get the best audio output, you need to adjust the Loudness. Adjust the volume till you find that sweet spot, as it will enhance your experience manifold.

3. Dynamic Bass Control:

Maybe your stereo system has this feature, maybe not. If it does, do enable it as it makes the bass much more punchy and beautiful.

4. Balance and Fade Control:

Balance Control lets you the audio output from the speakers located on the left and right, whilst the Fade Control or the Fader lets you control the rear and front.

The front speakers should play the melody and focus on the treble while the rear should back them up with lower frequencies, aka, bass. Lower the high-pass filter (to the minimum it can handle) of the front speakers by adjusting the subwoofer level. With that done, slowly start increasing the frequency till you find the sweet spot.

Check The Recommended High Bass headphones for better sound

No products found.

Best equalizer settings for bass for headphones:

There is an automatic “bass enhancer” or “boost” in your phone’s equalizer, and that performs pretty well for the most part. If that isn’t satisfactory, you can adjust the equalizer manually this way to get the best bass performance:

bass setting for headphoen - BEST EQUALIZER SETTINGS FOR BASS

Set the bass between 0db and +6db.
Set the mids and upper-mids at the same level as the bass.
Lower mids should be adjusted slightly below 0db.
Sub-bass should be adjusted to a level that is slightly above +6db.
Highs should be lower than upper mids, but for this part, I would say you can experiment around with and see what works for you.

Best equalizer settings for bass for PC:

In order to reach the equalizer on your PC, here is what you must do:

Click on the “Volume Control” icon in the bottom right corner and then go to “Playback Devices”.
Right-click the speaker icon and go to properties.
There are multiple bass-related sections that let you adjust the bass, namely “bass boost”, “enhancement,” and “bass balance.”
Look for “Equalizer” and click on it. There will be many options that pop up, so look for “Bass” and click on that.
Now, the bass equalizer will open, and it is time to get to work
Without getting into technicalities here, adjust sub-bass to +6db
Set Low mids to 0db.
The Bass should be adjusted slightly below +6db.
Set mids to the same level as bass, and upper mids and highs should be a little below the mids.

CONCLUSION

To objectively present you guys with the best equalizer setting for bass simply isn’t possible, but I tried my best. These settings work for most people. If they don’t work for you, feel free to experiment. Anyway, I hope this article was worth your time!

Gibson

Gibson is a blogger and reviewer, whose passion is helping people with all the aspects of music through the blog he provides. Also, he is an artist and loves to create his own tunes by purchasing good quality musical tools. With his own experience, he has provided a great list of tools for you in this blog. Seeking the best quality musical tools? Read this blog and end your music thirst!